欧盟Eurlex法规详细信息

EURLEX ID:32012R0392

OJ编号:OJ L 123, 9.5.2012, p. 1-26

中文标题:委员会委托条例(EU) No 392/2012,补充关于家用滚筒式干衣机能源标签方面的欧洲议会和理事会指令2010/30/EU(1)

原文标题:Commission Delegated Regulation (EU) No 392/2012 of 1 March 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household tumble driers (1)

分类:423,373

文件类型:二级立法 Regulation|条例

生效日期:2012-05-29

废止日期:2058-12-31

法规全文:查看欧盟官方文件

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/1
II
(Non-legislative acts)
REGULATIONS
COMMISSION DELEGATED REGULATION (EU) No 392/2012
of 1 March 2012
supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to
energy labelling of household tumble driers
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
incentives for suppliers to further improve the energy
efficiency of household tumble driers and to accelerate
market transformation towards energy-efficient technol
Having regard to the Treaty on the Functioning of the European
ogies.
Union,
(5) Household
combined
washer-driers
are
addressed
in
Having regard to Directive 2010/30/EU of the European
Commission Directive 96/60/EC of 19 September 1996
Parliament and of the Council of 19 May 2010 on the indi
implementing Council Directive 92/75/EEC with regard
cation by labelling and standard product information of the
to energy labelling of household combined washer-
consumption of energy and other resources by energy-related
driers ( 3 ). They have particular characteristics and
products (
should therefore be exempted from the scope of this

1 ), and in particular Article 10 thereof,
Regulation.
Whereas:
(6) The
information
provided
on
the
label
should
be
obtained through reliable, accurate and reproducible
measurement procedures which take into account the
(1) Directive
2010/30/EU
requires
the
Commission
to
adopt
recognised state-of-the-art measurement methods,
delegated acts for the labelling of energy-related products
including, where available, harmonised standards
representing significant potential for energy savings and
adopted by the European standardisation bodies, as
presenting a wide disparity in performance levels with
listed in Annex I to Directive 98/34/EC of the
equivalent functionality.
European Parliament and of the Council of 22 June
1998 laying down a procedure for the provision of
information in the field of technical standards and regu
(2) Provisions
for
the
energy
labelling
of
household
tumble
lations ( 4 ).
driers were established by Commission Directive
95/13/EC of 23 May 1995 implementing Council
Directive 92/75/EEC with regard to energy labelling of
(7) This
Regulation
should
specify
a
uniform
design
and
household electric tumble driers ( 2 ).
content for the label for household tumble driers,
including gas-fired driers.
(3) The
energy
used
by
household
tumble
driers
accounts
for
a significant part of total household energy demand in
(8) In
addition,
this
Regulation
should
specify
requirements
the Union. In addition to the energy efficiency
as to the ‘technical documentation’ and the ‘product
improvements already achieved, the scope for further
fiche’ for household tumble driers.
reducing the energy consumption of household tumble
driers is substantial.
(9) Moreover,
this
Regulation
should
specify
requirements
as
to the information to be provided for any form of
(4) Directive
95/13/EC
should
be
repealed
and
new
distance selling and advertisement of household tumble
provisions should be laid down by this Regulation in
driers and any form of technical promotional material for
order to ensure that the energy label provides dynamic
such appliances.
( 1 ) OJ L 153, 18.6.2010, p. 1.
( 3 ) OJ L 266, 18.10.1996, p. 1.
( 2 ) OJ L 136, 21.6.1995, p. 28.
( 4 ) OJ L 204, 21.7.1998, p. 37.

L 123/2
EN
Official Journal of the European Union
9.5.2012
(10) It
is
appropriate
to
provide
for
a
review
of
this
Regu
(7) ‘automatic tumble drier’ means a tumble drier which
lation in order to take into account technological
switches off the drying process when a certain moisture
progress.
content of the load is detected, for example through
conductivity or temperature sensing;
(11) In order to facilitate the transition from Directive
95/13/EC to this Regulation, household tumble driers
(8) ‘non-automatic tumble drier’ means a tumble drier which
labelled in accordance with this Regulation should be
switches off the drying process after a predefined period,
considered as compliant with Directive 95/13/EC.
usually controlled by a timer, but which may also be
manually switched off;
(12) Directive
95/13/EC
should
therefore
be
repealed,
(9) ‘programme’ means a series of operations that are
HAS ADOPTED THIS REGULATION:
predefined and which are declared by the supplier as
suitable for drying certain types of textile;
Article 1
Subject matter and scope
(10) ‘cycle’ means a complete drying process, as defined for the
selected programme;
1. This
Regulation
establishes
requirements
for
the
labelling
of and the provision of supplementary product information on
electric mains-operated and gas-fired household tumble driers
(11) ‘programme time’ means the time that elapses from the
and built-in household tumble driers, including those sold for
initiation of the programme until the completion of the
non-household use.
programme, excluding any end-user programmed delay;
2. This
Regulation
shall
not
apply
to
household
combined (12) ‘rated capacity’ means the maximum mass in kilograms,
washer-driers and household spin-extractors.
indicated by the supplier in 0,5 kilogram increments of
dry textiles of a particular type, which can be treated in a
Article 2
household tumble drier with the selected programme,
when loaded in accordance with the supplier’s instructions;
Definitions
In addition to the definitions laid down in Article 2 of Directive
(13) ‘partial load’ means half of the rated capacity of a
2010/30/EU, the following definitions shall apply for the
household tumble drier for a given programme;
purposes of this Regulation:
(1) ‘household tumble drier’ means an appliance in which
(14) ‘condensation efficiency’ means the ratio between the mass
textiles are dried by tumbling in a rotating drum,
of moisture condensed by a condenser tumble drier and
through which heated air is passed and which is
the mass of moisture removed from the load at the end of
designed to be used principally for non-professional
a cycle;
purposes;
(15) ‘off-mode’ means a condition where the household tumble
(2) ‘built-in household tumble drier’ means a household
drier is switched off using appliance controls or switches
tumble drier intended to be installed in a cabinet, a
accessible to and intended for operation by the end-user
prepared recess in a wall or a similar location, requiring
during normal use to attain the lowest power
furniture finishing;
consumption that may persist for an indefinite time
while the household tumble drier is connected to a
(3) ‘household combined washer-drier’ means a household
power source and used in accordance with the supplier’s
washing machine which includes both a spin extraction
instructions; where there is no control or switch accessible
function and also a means for drying the textiles, usually
to the end-user, ‘off-mode’ means the condition reached
by heating and tumbling;
after the household tumble drier reverts to a steady-state
power consumption on its own;
(4) ‘household spin-extractor’, also known commercially as
‘spin-drier’, means an appliance in which water is
(16) ‘left-on mode’ means the lowest power consumption mode
removed from the textiles by centrifugal action in a
that may persist for an indefinite time after completion of
rotating drum and drained through an automatic pump
the programme without any further intervention by the
and which is designed to be used principally for non-
end-user besides unloading of the household tumble drier;
professional purposes;
(17) ‘equivalent household tumble drier’ means a model of
(5) ‘air-vented tumble drier’ means a tumble drier that draws
household tumble drier placed on the market with the
in fresh air, passes it over the textiles and vents the
same rated capacity, technical and performance character
resulting moist air into the room or outside;
istics, energy consumption, condensation efficiency where
relevant, standard cotton programme time and airborne
(6) ‘condenser tumble drier’ means a tumble drier which
acoustical noise emissions during drying as another
includes a device (either using condensation or any other
model of household tumble drier placed on the market
means) for removing moisture from the air used for the
under a different commercial code number by the same
drying process;
supplier;

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/3
(18) ‘end-user’ means a consumer buying or expected to buy a
Article 5
household tumble drier;
Measurement methods
(19) ‘point of sale’ means a location where household tumble
The information to be provided under Articles 3 and 4 shall be
driers are displayed or offered for sale, hire or hire-
obtained by reliable, accurate and reproducible measurement
purchase.
procedures, which take into account the recognised state-of-
the-art measurement methods.
(20) ‘standard cotton programme’ means the cycle which dries
cotton laundry with an initial moisture content of the load
Article 6
of 60 % up to a remaining moisture content of the load of
0 %.
Verification procedure for market surveillance purposes
Member States shall apply the procedure set out in Annex V for
Article 3
assessing the conformity of the declared energy efficiency class,
Responsibilities of suppliers
the energy consumption per cycle, the condensation efficiency
class where applicable, the rated capacity, the power
Suppliers shall ensure that:
consumption in off-mode and left-on mode, the duration of
the left-on mode, the programme time and airborne acoustical
(a) each household tumble drier is supplied with a printed label
noise emissions.
in the format and containing the information set out in
Annex I;
Article 7
(b) a product fiche, as set out in Annex II, is made available;
Revision
The Commission shall review this Regulation in the light of
(c) technical documentation as set out in Annex III is made
technological progress no later than five years after its entry
available on request to the authorities of the Member
into force. The review shall in particular assess the verification
States and to the Commission;
tolerances set out in Annex V.
(d) any advertisement for a specific model of household tumble
drier contains the energy efficiency class, if the adver
Article 8
tisement discloses energy-related or price information;
Repeal
Directive 95/13/EC shall be repealed from 29 May 2012.
(e) any technical promotional material concerning a specific
model of household tumble drier which describes its
specific technical parameters includes the energy efficiency
Article 9
class of that model.
Transitional provisions
Article 4
1. Article 3(d) and (e) and Article 4(b), (c) and (d) shall not
Responsibilities of dealers
apply to printed advertisements and printed technical
promotional material published before 29 September 2012.
Dealers shall ensure that:
2. Household
tumble
driers
placed
on
the
market
before
(a) each household tumble drier, at the point of sale, bears the
29 May 2012 shall comply with the provisions of Directive
label provided by suppliers in accordance with Article 3(a)
95/13/EC.
on the outside of the front or top of the household tumble
drier, in such a way as to be clearly visible;
3. Household tumble driers which comply with the
(b) household tumble driers offered for sale, hire or hire-
provisions of this Regulation and which are placed on the
purchase where the end-user cannot be expected to see
market or offered for sale, hire or hire-purchase before
the product displayed, as specified in Article 7 of
29 May 2012 shall be regarded as complying with the
Directive 2010/30/EU, are marketed with the information
requirements of Directive 95/13/EC.
provided by suppliers in accordance with Annex IV to this
Regulation;
Article 10
(c) any advertisement for a specific model of household tumble
Entry into force and application
drier contains a reference to the energy efficiency class, if
the advertisement discloses energy-related or price
1.
This Regulation shall enter into force on the twentieth day
information;
following that of its publication in the Official Journal of the
European Union.
(d) any technical promotional material concerning a specific
model of household tumble drier which describes its
2. It
shall
apply
from
29
May
2012.
However,
Article
3(d)
specific technical parameters includes a reference to the
and (e) and Article 4(b), (c) and (d) shall apply from
energy efficiency class of that model.
29 September 2012.

L 123/4
EN
Official Journal of the European Union
9.5.2012
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 1 March 2012.
For the Commission
The President
José Manuel BARROSO


EN
9.5.2012 Official
Journal
of
the
European
Union L
123/5
ANNEX I
Label
1. LABEL FOR AIR-VENTED HOUSEHOLD TUMBLE DRIER
1.1. The following information shall be included in the label for air vented household tumble driers:
I. supplier’s name or trade mark;
II. supplier’s model identifier, meaning the code, usually alphanumeric, which distinguishes a specific household
tumble drier model from other models with the same trade mark or supplier’s name;

L 123/6
EN
Official Journal of the European Union
9.5.2012
III. the energy efficiency class as defined in point 1 of Annex VI; the head of the arrow containing the energy
efficiency class of the household tumble drier shall be placed at the same height as the head of the arrow of the
relevant energy efficiency class;
IV. weighted annual energy consumption (AE C ) in kWh/year, rounded up to the nearest integer and calculated in
accordance with Annex VII;
V. information on the type of household tumble drier;
VI. cycle time corresponding to the standard cotton programme at full load in minutes and rounded to the nearest
minute;
VII. rated capacity, in kg, for the standard cotton programme at full load;
VIII. the sound power level (weighted average value — L WA ), during the drying phase, for the standard cotton
programme at full load, expressed in dB, rounded to the nearest integer.
1.2. The design of the label for air vented household tumble driers shall be in accordance with point 4 of this Annex.
Where a model has been granted an ‘EU Ecolabel’ under Regulation (EC) No 66/2010 of the European Parliament
and of the Council ( 1 ), a copy of the EU Ecolabel may be added.
( 1 ) OJ L 27, 30.1.2010, p. 1.


EN
9.5.2012 Official
Journal
of
the
European
Union L
123/7
2. LABEL FOR CONDENSER HOUSEHOLD TUMBLE DRIER
2.1. In addition to the information listed in point 1.1, the label for condenser household tumble driers shall include:
IX. the condensation efficiency class in accordance with point 2 of Annex VI.
2.2. The design of the label for condenser household tumble driers shall be in accordance with point 4 of this Annex.
Where a model has been awarded an ‘EU Ecolabel’ under Regulation (EC) No 66/2010, a copy of the EU Ecolabel
may be added.


L 123/8
EN
Official Journal of the European Union
9.5.2012
3. LABEL FOR GAS-FIRED HOUSEHOLD TUMBLE DRIER
3.1. The information listed in point 1.1 shall be included in the label for gas fired household tumble driers.
3.2. The design of the label for gas fired household tumble driers shall be in accordance with point 4 of this Annex.
Where a model has been awarded an ‘EU Ecolabel’ under Regulation (EC) No 66/2010, a copy of the EU Ecolabel
may be added.
4. LABEL
DESIGN
4.1. For air vented household tumble driers, the design of the label shall be as in the figure below.


EN
9.5.2012 Official
Journal
of
the
European
Union L
123/9

L 123/10
EN
Official Journal of the European Union
9.5.2012
Whereby
(a) The label must be at least 110 mm wide and 220 mm high. Where the label is printed in a larger format, its
content must nevertheless remain proportionate to the specifications above.
(b) The background shall be white.
(c) Colours shall be CMYK — cyan, magenta, yellow and black following this example: 00-70-X-00: 0 % cyan, 70 %
magenta, 100 % yellow, 0 % black.
(d) The label shall fulfil all of the following requirements (numbers refer to the figure above).
Eu label border stroke: 5 pt — colour: Cyan 100 % — round corners: 3,5 mm.
EU logo — colours: X-80-00-00 and 00-00-X-00.
Energy label: colour: X-00-00-00. Pictogram as depicted; EU logo and energy logo (combined): width:
92 mm, height: 17 mm.
Sub-logos border: 1 pt — colour: Cyan 100 % — length: 92,5 mm.
A-G scale
Arrow: height: 7 mm, gap: 0,75 mm – colours:
Highest class: X-00-X-00,
Second class: 70-00-X-00,
Third class: 30-00-X-00,
Fourth class: 00-00-X-00,
Fifth class: 00-30-X-00,
Sixth class: 00-70-X-00,
Last class: 00-X-X-00.
Text: Calibri bold 18 pt, capitals and white; ‘+’ symbols: Calibri bold 12 pt, white aligned on a single
row.
Energy efficiency class
Arrow: width: 26 mm, height: 14 mm, 100 % black;
Text: Calibri bold 29 pt, capitals and white; ‘+’ symbols: Calibri bold 18 pt, white aligned on a single
row.
Energy
Text: Calibri regular 11 pt, capitals, 100 % black.
Weighted annual energy consumption:
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 30 pt, 100 % black.
Second line: Calibri regular 14 pt, 100 % black.

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/11
Type of household tumble drier:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Cycle time:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Rated capacity:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100% — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Sound power level:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Asterisk: Calibri regular 6 pt, 100 % black.
Supplier's name or trade mark
Supplier's model identifier
The supplier's name or trademark and model identifier should fit in a space of 92 × 15 mm.
Numbering of the Regulation: Calibri bold 9 pt, 100 % black.
4.2. For condenser household tumble driers, the design of the label shall be as in the figure below.


L 123/12
EN
Official Journal of the European Union
9.5.2012

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/13
Whereby
(a) The label must be at least 110 mm wide and 220 mm high. Where the label is printed in a larger format, its
content must nevertheless remain proportionate to the specifications above.
(b) The background shall be white.
(c) Colours shall be CMYK — cyan, magenta, yellow and black following this example: 00-70-X-00: 0 % cyan, 70 %
magenta, 100 % yellow, 0 % black.
(d) The label shall fulfil all of the following requirements (numbers refer to the figure above).
Eu label border stroke: 5 pt — colour: Cyan 100 % — round corners: 3,5 mm.
EU logo — colours: X-80-00-00 and 00-00-X-00.
Energy label: colour: X-00-00-00. Pictogram as depicted; EU logo and energy logo (combined): width:
92 mm, height: 17 mm.
Sub-logos border: 1 pt — colour: Cyan 100 % — length: 92,5 mm.
A-G scale
Arrow: height: 7 mm, gap: 0,75 mm — colours:
Highest class: X-00-X-00,
Second class: 70-00-X-00,
Third class: 30-00-X-00,
Fourth class: 00-00-X-00,
Fifth class: 00-30-X-00,
Sixth class: 00-70-X-00,
Last class: 00-X-X-00.
Text: Calibri bold 18 pt, capitals and white; ‘+’ symbols: Calibri bold 12 pt, white aligned on a single
row.
Energy efficiency class
Arrow: width: 26 mm, height: 14 mm, 100 % black;
Text: Calibri bold 29 pt, capitals and white; ‘+’ symbols: Calibri bold 18 pt, white aligned on a single
row.
Energy
Text: Calibri regular 11 pt, capitals, 100 % black.
Weighted annual energy consumption:
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 30 pt, 100 % black.
Second line: Calibri regular 14 pt, 100 % black.

L 123/14
EN
Official Journal of the European Union
9.5.2012
Type of household tumble drier:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Cycle time:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Rated capacity:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Sound power level:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Asterisk: Calibri regular 6 pt, 100 % black.
Supplier's name or trade mark
Supplier's model identifier
The supplier's name or trademark and model identifier should fit in a space of 92 × 15 mm.
Numbering of the Regulation: Calibri bold 9 pt, 100 % black.
Condensation efficiency class:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri regular 16 pt, horizontal scale 75 %, 100 % black and Calibri bold 22 pt, horizontal
scale 75 %, 100 % black.
4.3. For gas fired household tumble driers, the design of the label shall be as in the figure below.


EN
9.5.2012 Official
Journal
of
the
European
Union L
123/15

L 123/16
EN
Official Journal of the European Union
9.5.2012
Whereby
(a) The label must be at least 110 mm wide and 220 mm high. Where the label is printed in a larger format, its
content must nevertheless remain proportionate to the specifications above.
(b) The background shall be white.
(c) Colours shall be CMYK — cyan, magenta, yellow and black following this example: 00-70-X-00: 0 % cyan, 70 %
magenta, 100 % yellow, 0 % black.
(d) The label shall fulfil all of the following requirements (numbers refer to the figure above).
Eu label border stroke: 5 pt — colour: Cyan 100 % — round corners: 3,5 mm.
EU logo — colours: X-80-00-00 and 00-00-X-00.
Energy label: colour: X-00-00-00. Pictogram as depicted; EU logo and energy logo (combined): width:
92 mm, height: 17 mm.
Sub-logos border: 1 pt — colour: Cyan 100 % — length: 92,5 mm.
A-G scale
Arrow: height: 7 mm, gap: 0,75 mm — colours:
Highest class: X-00-X-00,
Second class: 70-00-X-00,
Third class: 30-00-X-00,
Fourth class: 00-00-X-00,
Fifth class: 00-30-X-00,
Sixth class: 00-70-X-00,
Last class: 00-X-X-00.
Text: Calibri bold 18 pt, capitals and white; '+' symbols: Calibri bold 12 pt, white aligned on a single
row.
Energy efficiency class
Arrow: width: 26 mm, height: 14 mm, 100 % black;
Text: Calibri bold 29 pt, capitals and white; '+' symbols: Calibri bold 18 pt, white aligned on a single
row.
Energy
Text: Calibri regular 11 pt, capitals, 100 % black.
Weighted annual energy consumption:
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 30 pt, 100 % black.
Second line: Calibri regular 14 pt, 100 % black.

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/17
Type of household tumble drier:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Cycle time:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Rated capacity:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Sound power level:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Asterisk: Calibri regular 6 pt, 100 % black
Supplier's name or trade mark
Supplier's model identifier
The supplier's name or trademark and model identifier should fit in a space of 92 × 15 mm.
Numbering of the Regulation: Calibri bold 9 pt, 100 % black.

L 123/18
EN
Official Journal of the European Union
9.5.2012
ANNEX II
Product Fiche
1. The information in the product fiche of household tumble driers shall be given in the following order and shall be
included in the product brochure or other literature provided with the product:
(a) supplier’s name or trade mark;
(b) supplier’s model identifier, which means the code, usually alphanumeric, which distinguishes a specific household
tumble drier model from other models with the same trade mark or supplier’s name;
(c) rated capacity in kg of cotton laundry for the standard cotton programme at full load;
(d) whether the household tumble drier is an air-vented, condenser or gas-fired household tumble drier;
(e) energy efficiency class in accordance with point 1 of Annex VI;
(f) for
electric
mains-operated
household
tumble
drier:
the weighted Annual Energy Consumption (AE c ) rounded up to one decimal place; it shall be described as: ‘Energy
consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at full and partial
load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how
the appliance is used.’;
for household gas-fired tumble drier:
the weighted Annual Energy Consumption (AE C(Gas) ) rounded up to one decimal place; it shall be described as:
‘Energy consumption “X” kWh-Gas per year, based on 160 drying cycles of the standard cotton programme at full
and partial load. Actual energy consumption per cycle will depend on how the appliance is used’;
and
the weighted Annual Energy Consumption (AE C(Gas)el ) rounded up to one decimal place; it shall be described as:
‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at full and
partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on
how the appliance is used.’;
(g) whether the household tumble drier is an ‘automatic tumble drier’ or ‘non-automatic tumble drier’;
(h) where the household tumble drier has been awarded an ‘EU Ecolabel award’ under Regulation (EC) No 66/2010,
this information may be included;
(i) the
energy
consumption
(E dry , E dry , Eg dry , Eg dry , Eg dry,a , Eg dry,a ) of the standard cotton programme at full and
partial load;
(j) the power consumption of the off-mode (P o ) and of the left-on mode (P l ) for the standard cotton programme at
full load;
(k) if the household tumble drier is equipped with a power management system, the duration of the ‘left-on mode’;
(l) indication that the ‘standard cotton programme’ used at full and partial load is the standard drying programme to
which the information in the label and the fiche relates, that this programme is suitable for drying normal wet
cotton laundry and that it is the most efficient programme in terms of energy consumption for cotton;
(m) the weighted programme time (T t ) of the ‘standard cotton programme at full and partial load’ in minutes and
rounded to the nearest minute as well as the programme time of the ‘standard cotton programme at full load’
(T dry ) and the programme time of the ‘standard cotton programme at partial load’ (T dry ) in minutes and rounded
to the nearest minute;

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/19
(n) if the household tumble drier is a condenser tumble drier, the condensation efficiency class in accordance with
point 2 of Annex VI, expressed as ‘condensation efficiency class ‘X’ on a scale from G (least efficient) to A (most
efficient)’; this may be expressed by other means provided it is clear that the scale is from G (least efficient) to A
(most efficient);
(o) if the household tumble drier is a condenser tumble drier, the average condensation efficiency C dry and C dry of the
standard cotton programme at full load and partial load and the weighted condensation efficiency (C t ) for the
‘standard cotton programme at full and partial load’, as a percentage and rounded to the nearest whole percent;
(p) the sound power level (weighted average value — L WA ) expressed in dB and rounded to the nearest integer for the
standard cotton programme at full load;
(q) if the household tumble drier is intended to be built-in, an indication to this effect.
2. One product fiche may cover a number of household tumble drier models supplied by the same supplier.
3. The information contained in the fiche may be given in the form of a copy of the label, either in colour or in black
and white. Where this is the case, the information listed in point 1 not already displayed on the label shall also be
provided.

L 123/20
EN
Official Journal of the European Union
9.5.2012
ANNEX III
Technical documentation
1. The technical documentation referred to in Article 3(c) shall include:
(a) the name and address of the supplier;
(b) a general description of the household tumble drier model, sufficient for it to be unequivocally and easily
identified;
(c) where appropriate, the references of the harmonised standards applied;
(d) where appropriate, the other technical standards and specifications used;
(e) the identification and signature of the person empowered to bind the supplier;
(f) technical parameters for measurements as follows:
(i) for electric mains-operated household tumble drier:
the energy consumption (E dry , E dry , Eg dry , Eg dry , Eg dry,a , Eg dry,a ) of the standard cotton programme at full and
partial load,
for household gas-fired tumble drier:
the weighted Annual Energy Consumption (AE C(Gas) ) rounded up to one decimal place; it shall be described as:
‘Energy consumption “X” kWh-Gas per year, based on 160 drying cycles of the standard cotton programme at
full and partial load. Actual energy consumption per cycle will depend on how the appliance is used’;
and
the weighted Annual Energy Consumption (AE C(Gas)el ) rounded up to one decimal place; it shall be described
as: ‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at
full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will
depend on how the appliance is used.’;
(ii) power consumption in ‘off-mode’ and the power consumption in ‘left-on mode’;
(iii) the programme time of the ‘standard cotton programme at full load’ (T dry ) and the programme time of the
‘standard cotton programme at partial load’ (T dry ), in minutes and rounded to the nearest minute;
(iv) if the household tumble drier is equipped with a power management system, the duration of the ‘left-on
mode’;
(v) if the household tumble drier is a condenser tumble drier, the average condensation efficiency C dry of the
standard cotton programme at full load and the average condensation efficiency of the standard cotton
programme at partial load C dry ;
(vi) the sound power level;
(g) the results of calculations performed in accordance with Annex VII.
2. Where the information included in the technical documentation for a particular household tumble drier model has
been obtained by calculation on the basis of design or by extrapolation from other equivalent household tumble driers,
or both, the documentation shall include details of such calculations or extrapolations, or both, and of tests
undertaken by suppliers to verify the accuracy of the calculations undertaken. The information shall also include a
list of all other equivalent household tumble drier models where the information was obtained in the same way.

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/21
ANNEX IV
Information to be provided in cases where end-users cannot be expected to see the product displayed
1. The information referred to in Article 4(b) shall be provided in the following order:
(a) the rated capacity in kg of cotton, for the standard cotton programme at full load;
(b) whether the household tumble drier is an air-vented, condenser or gas-fired household tumble drier;
(c) the energy efficiency class as defined in point 1 of Annex VI;
(d) for electric mains-operated household tumble drier:
the weighted Annual Energy Consumption (AE c ) rounded up to the nearest integer, to be described as: ‘Energy
consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programmes at full and partial
load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the
appliance is used.’;
for household gas-fired tumble drier:
the weighted Annual Energy Consumption (AE C(Gas) ) rounded up to one decimal place; it shall be described as:
‘Energy consumption “X” kWh-Gas per year, based on 160 drying cycles of the standard cotton programme at full
and partial load. Actual energy consumption per cycle will depend on how the appliance is used’;
and
the weighted Annual Energy Consumption (AE C(Gas)el ) rounded up to one decimal place; it shall be described as:
‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at full and
partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on
how the appliance is used.’;
(e) whether the household tumble drier is an ‘automatic tumble drier’ or ‘non-automatic tumble drier’;
(f) the energy consumption (E dry , E dry , Eg dry , Eg dry , Eg dry,a , Eg dry,a ) of the standard cotton programme at full and
partial load, rounded up to two decimal places and calculated in accordance with Annex VII;
(g) the power consumption of the off-mode (P o ) and the left-on mode (P l ) for the standard cotton programme at full
load;
(h) the programme time of the ‘standard cotton programme at full load’ (T dry ) and the programme time of the
‘standard cotton programme at partial load’ (T dry ), in minutes and rounded to the nearest minute, calculated
in accordance with Annex VII;
(i) if the household tumble drier is a condenser tumble drier, the condensation efficiency class in accordance with
point 2 of Annex VI;
(j) the sound power level (weighted average value — L WA ) for the standard cotton programme at full load, expressed
in dB and rounded to the nearest integer;
(k) if the household tumble drier is intended to be built-in, an indication to this effect.
2. Where other information contained in the product fiche is also provided, it shall be in the form and order specified in
Annex II.
3. The size and font in which all the information referred in this Annex is printed or shown shall be legible.

L 123/22
EN
Official Journal of the European Union
9.5.2012
ANNEX V
Verification procedure for market surveillance purposes
For the purposes of compliance and verification of compliance with the requirements of this Regulation, measurements
and calculations shall be made using harmonised standards the reference numbers of which have been published in the
Official Journal of the European Union, or other reliable, accurate and reproducible methods, which take into account the
generally recognised state of the art methods, and whose results are deemed to be of low uncertainty.
For the purposes of checking conformity with the requirements laid down in Articles 3 and 4, Member State authorities
shall test a single household tumble drier. If the measured parameters do not meet the values declared by the supplier
within the ranges set out in Table 1, the measurements shall be carried out on three more household tumble driers. The
arithmetic mean of the measured values of those three household tumble driers shall meet the values declared by the
supplier within the ranges defined in Table 1.
Otherwise, the model and all other equivalent household tumble driers models shall be considered not to comply with the
requirements laid down in Articles 3 and 4.
Table 1
Measured parameter Verification
tolerances
Weighted annual energy consumption The
measured
value
shall
not
be
greater
than
the
rated
value
(*)
of
AE C by more than 6 %.
Weighted energy consumption
The measured value shall not be greater than the rated value of E t
by more than 6 %.
Weighted condensation efficiency
The measured value shall not be less than the rated value of C t by
more than 6 %.
Weighted programme time The
measured
value
shall
not
be
longer
than
the
rated
values
of T t
by more than 6 %.
Power consumption in off-mode and left-on mode The
measured
value
of
power
consumption P o and P l of more than
1,00 W shall not be greater than the rated value by more than 6 %.
The measured value of power consumption P o and P l of less than or
equal to 1,00 W shall not be greater than the rated value by more
than 0,10 W.
Duration of the left-on mode The
measured
value
shall
not
be
longer
than
the
rated
value
of T l by
more than 6 %.
Sound power level L WA
The measured value shall not be greater than the rated value.
(*) ‘Rated value’ means a value that is declared by the supplier. The 6 % uncertainty in the measurement represent the current acceptable
testing laboratory error in measuring the declared parameters with the new measurement method used for the new labelling/ecodesign
requirements including full and partial load cycles.

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/23
ANNEX VI
Energy efficiency classes and condensation efficiency classes
1. ENERGY EFFICIENCY CLASSES
The energy efficiency class of a household tumble drier shall be determined on the basis of its Energy Efficiency Index
(EEI) as set out in Table 1.
The Energy Efficiency Index (EEI) of a household tumble drier shall be determined in accordance with point 1 of
Annex VII.
Table 1
Energy efficiency classes
Energy efficiency class Energy
Efficiency
Index
A+++ (most efficient) EEI
<
24
A++ 24
≤ EEI < 32
A+ 32
≤ EEI < 42
A 42
≤ EEI < 65
B 65
≤ EEI < 76
C 76
≤ EEI < 85
D (least efficient) 85
≤ EEI
2. CONDENSATION EFFICIENCY CLASSES
The condensation efficiency class of a condenser household tumble drier shall be determined on the basis of the
weighted condensation efficiency (C t ) as set out in Table 2.
The weighted condensation efficiency (C t ) of a condenser household tumble drier shall be determined in accordance
with point 2 of Annex VII.
Table 2
Condensation efficiency classes
Condensation efficiency class Weighted
condensation
efficiency
A (most efficient)
C t > 90
B 80
< C t ≤ 90
C 70
< C t ≤ 80
D 60
< C t ≤ 70
E
50 < C t ≤ 60
F
40 < C t ≤ 50
G (least efficient)
C t ≤ 40

L 123/24
EN
Official Journal of the European Union
9.5.2012
ANNEX VII
Method for calculating the Energy Efficiency Index and the weighted condensation efficiency
1. CALCULATION OF THE ENERGY EFFICIENCY INDEX
For the calculation of the Energy Efficiency Index (EEI) of a household tumble drier model, the weighted Annual
Energy Consumption of a household tumble drier for the standard cotton programme at full and partial load is
compared to its Standard Annual Energy Consumption.
(a) The Energy Efficiency Index (EEI) is calculated as follows and rounded to one decimal place:
AE
EEI

C
SAE C 100
where:
AE C = weighted Annual Energy Consumption of the household tumble drier.
SAE C = standard Annual Energy Consumption of the household tumble drier.
(b) The Standard Annual Energy Consumption (SAE C ) is calculated in kWh/year as follows and rounded to two
decimal places:
— for all household tumble driers that are not air-vented:
SAE C = 140 × c 0,8
— for air-vented household tumble driers:
T
SAE
t

C 140 c 0;8 – 8 > :30 9
60 > ;
where:
c is the rated capacity of the household tumble drier for the standard cotton programme.
T t is the weighted programme time for the standard cotton programme.
(c) The weighted Annual Energy Consumption (AE C ) is calculated in kWh/year as follows and is rounded to two
decimal places:
(i)
" 525 600 –
525 600 –
P
T t
T t
#
o
160
160
2
2
AE

P l

C E t 160
60 1 000

where:
E t = weighted energy consumption, in kWh and rounded to two decimal places.
P o = power in ‘off-mode’ for the standard cotton programme at full load, in W and rounded to two decimal
places.
P l = power in ‘left-on mode’ for the standard cotton programme at full load, in W and rounded to two
decimal places.
T t = weighted programme time, in minutes and rounded to the nearest minute.
160 = total number of drying cycles per year.
(ii) When the household tumble drier is equipped with a power management system, with the household tumble
drier reverting automatically to ‘off-mode’ after the end of the programme, the weighted Annual Energy
Consumption (AE C ) is calculated taking into consideration the effective duration of the ‘left-on mode’,
according to the following formula:
AE C E t 160 fP l T l 160 P o 525 600 – T t 160 – T l 160g
60 1 000

EN
9.5.2012 Official
Journal
of
the
European
Union L
123/25
where:
T l = duration of the ‘left-on mode’ for the standard cotton programme at full load, in minutes and rounded to
the nearest minute.
(d) The weighted programme time (T t ) for the standard cotton programme is calculated in minutes as follows and
rounded to the nearest minute:
T t = (3 × T dry + 4 × T dry )/7
where:
T dry = programme time for the standard cotton programme at full load, in minutes and rounded to the nearest
minute.
T dry = programme time for the standard cotton programme at partial load, in minutes and rounded to the
nearest minute.
(e) The weighted energy consumption (E t ) is calculated in kWh as follows and rounded to two decimal places:
E t = (3 × E dry + 4 × E dry )/7
where:
E dry = energy consumption of the standard cotton programme at full load, in kWh and rounded to two decimal
places.
E dry = energy consumption of the standard cotton programme at partial load, in kWh and rounded to two
decimal places.
(f) For gas-fired household tumble driers, the energy consumption for the standard cotton programme at full and
partial load is calculated in kWh and rounded to two decimal places, as:
Eg
E
dry

dry f g Eg dry;a
Eg
E
dry

dry f g Eg dry;a
where:
Eg dry = gas consumption of the standard cotton programme at full load, in kWh and rounded to two decimal
places.
Eg dry = gas consumption of the standard cotton programme at partial load, in kWh and rounded to two
decimal places.
Eg dry,a = auxiliary electricity consumption of the standard cotton programme at full load, in kWh and rounded
to two decimal places.
Eg dry,a = auxiliary electricity consumption of the standard cotton programme at partial load, in kWh and
rounded to two decimal places.
f g
= 2,5.
2. CALCULATION FOR THE PRODUCT INFORMATION DESCRIBED IN ‘ANNEX II PRODUCT FICHE’, ‘ANNEX III
TECHNICAL DOCUMENTATION’ AND ‘ANNEX IV INFORMATION TO BE PROVIDED IN CASES WHERE END-
USERS CANNOT BE EXPECTED TO SEE THE PRODUCT DISPLAYED’
For gas-fired household tumble driers, the energy consumption on gas for the standard cotton programme at full and
partial load for the information in Annex II, III and IV is calculated in kWh Gas and rounded to two decimal places, as:
AE C(Gas) = 160 × (3 × Eg dry + 4 × Eg dry1/2 )/7
For gas-fired household tumble driers, the energy consumption on electricity for the standard cotton programme at
full and partial load for the information in Annex II, III and IV is calculated in kWh and rounded to two decimal
places, as:
AE C(Gas)el = 160 × (3 × Eg dry,a + 4 × Eg dry1/2,a )/7 + ((P l × T l × 160) + P o × [525 600 – (T t × 160) – (T l × 160)])/60 × 1 000

L 123/26
EN
Official Journal of the European Union
9.5.2012
3. CALCULATION OF THE WEIGHTED CONDENSATION EFFICIENCY
The condensation efficiency of a programme is the ratio between the mass of moisture condensed and collected in the
container of a condenser household tumble drier and the mass of moisture removed from the load by the programme,
the latter being the difference between the mass of the wet test load before drying and the mass of the test load after
drying. For calculating the weighted condensation efficiency, the average condensation efficiency for the standard
cotton programme at both full and partial load is considered.
The weighted condensation efficiency (C t ) of a programme is calculated as a percentage and rounded to the nearest
whole percent as:
C t = (3 × C dry + 4 × C dry )/7
where:
C dry = average condensation efficiency of the standard cotton programme at full load.
C dry = average condensation efficiency of the standard cotton programme at partial load.
The average condensation efficiency C is calculated from the condensation efficiencies of test runs and expressed as a
percentage:
1
n
W
C
wj
8
n–1 X W 100
j
>
2 > : i – W f 9 > ;
where:
n
is the number of test runs, comprising at least four valid test runs for the selected programme.
j is
the
test
run
number.
W wj is the mass of water collected in the condenser reservoir during test run j.
W i is the mass of the wet test load before drying.
W f is the mass of the test load after drying.

Document Outline


附件:

P020171219251436163431.pdf

触碰右侧展开